Ron Mack Machinery Australia Pty Ltd

1 only Tecmor model C.45 Reo Cutter. Specification Capacity 1 Bar 40 mm 2 Bars 28 mm 3 Bars 22 mm Size 110 x 65 x 100 cm Weight 647 kg Motor 3 kw Features Cast block construction. Gear drive in wear resistant steel. All moving parts are hardened. Cutting blade 4 sided.

Mitseiki LH-1000 Horizontal Machining Centre Pallet size mm 2 x 1000 x 1000 Max table load kg 3500 Travels X, Y, Z mm 2100 x 1235 x 1235 Rapid traverse m min 24 Cutting feed range m min 1 10,000 Spindle taper BT 50 Spindle speeds rpm 6000 ATC arm type 60 tools Spindle motor kw 26 22 Controller Fanuc OiMD Machine weight kg 32000 C w chain type ATC, 0.001 pallet indexing, 2 speed gearbox, preparation for CTS, heavy duty roller type linear guide ways for all axes, oil skimmer, spindle oil chiller, oil chiller for ball screws. Many other options are available on request. This is one of t...

Mitseiki HBM-4T CNC Horizontal Borer Table size mm 1400 x 1600 1600 x 1800 opt Max table load kg 8000 10000 opt Travels X, Y, Z, W mm 2000 3000 x 2000 x 1400 x 700 Rapid traverse m min 10 Spindle diameter mm 130 Spindle taper BT 50 Spindle speeds rpm 3000 ATC optional 60 tools Spindle motor kw 22 30 Controller Fanuc Siemens Heidenhain Machine weight kg 40000 C w 0.001 table indexing, chip auger, spindle oil chiller. Many other options are available on request.

FICEP manufactures this machine since more than thirty years and it recently became one of the benchmarks for every machine tool manufacturer. CNC automatic beam line for drilling shaped and flat profiles, FICEP Excalibur is the first monospindle gantry drilling line to process beams for the steel construction industry working with the CANTILEVER system. The machine is hanging on and moves along its loading table. This simple and brilliant solution proposing a machine hanging on its loading table offers to small and mid-size steel constructions a drilling unit at Thanks to a set of w...

Swiss Type Lathes for Small Part Production 5 models available with capacities from 16mm 42mm and long stacker type bar feeder as standard, Fanuc Control, many tooling configurations EVEN POLYGONAL TURNING IS POSSIBLE With leading technology and high quality components. Goodways Swiss Turning Centres provide the best solution for those work pieces smaller than 42 mm. Additionally the SD SW series are not only with a super rigid body, faster moving and a big variety of tooling available but they are also available with sub-spindle, live tooling and some equipped with a standard bar-fe...

OMGA TRF 527 DOUBLE MITRE SAW Series of double mitre saws with right head fixed and left head mobile for cutting glazing beads.The basic version the mobile head movement driven by hand wheel complete with mechanical gauge to read measurement. Available on requested are the version with hand wheel and digital display of the cutting length or NC Numerical positioner.All the models come complete with rotary table with machanical locking device for 90 and 45 degrees angles right and left, two pneumatic clamps synchronized with blade decent and glazing bead support on two levels for simul...

Pre-milling, End trim Top and bottom trim Flat scrapers

Pre-milling End trim Top and bottom trim Corner rounding Flat scrapers

Three axis Overhead control panel Programmable rip fence, electric rise fall and tilt with LED digital readout on crosscut stops 500mm main saw 7.5 hp 3 phase Overhead guard

Robland Panel Saw 3800mm table Single axis Overhead control panel Programmable rip fence, Electric rise fall and tilt with LED Digital readout on cross cut stops 500mm main saw 7.5 hp 3 phase Overhead saw guard

Robland Z400EL Panel Saw 3800mm table Digital readout to rip fence Electric rise fall and tilt 400mm blade overhead saw guard 7.5 hp 3 phase

6.6 hp 3 phase 1.1 4 spindle